|
|
Drawing:
|
 |
|
Product name： |
T5 LED tube light kits |
|
Serial number： |
LZPC-5-B |
|
Specification: |
￠16 |
| PCB size: | 11.5mm×1.0mm (width×thickness |
|
Assembling： |
1/2 PC cover + 1/2 heat sink + two end caps |
| PC cover type: | 1： Transparent
2： Transparent with inner strips 3： Diffused |
|
Material: |
1： Polycarbonate
Transparent PC Material / Milky Diffused Material
Raw material mode：
PC-3110ZHP、PC-1250Z-100、PC-S2000UVR、PC- 2215、PC-EKD2108.
Flame retardant: 94-V2、 94-V0 2: AL 6063 (6063-T5 navigational aluminum) |
|
Power supply device: |
External power supply |
|
Transmittance: |
2: Diffused PC cover ≥ 87%. |
|
Beam angle: |
≥ 187° |
|
Features: |
1： High transmittance、
2： Uniform luminous、
3： Anti-yellowing: not going yellow in 3-5 years 、
4： High anti-UV index、
5： Good freezing resistance: Non-embritterment above -50℃ ;
6： High thermo stability: without distortions below 130℃.
7： Glow-wire test past 650℃.
8： The 6063-T5 aviation aluminum is good at rapid heat dispersion.
9： The warranty can be up to 5 years, under the proper temperature conditions in doors. |
| Report: | We can supply the material reports: UL、MSDS、SGS、REACH and so on. |
|
Test methods: |
1： Salt mist test、
2： High free drop anti cracking test、
3： high and low temperature test、 4： Anti-yellowing in outdoor exposure test. |
|
Inspection accordance: |
professional standards |
|
Tips: |
2: In case rise the problem as above, Paying attention to not applying some substances as following:
A: Industrial Thinner、
B: Alcohol、
C: Plate washer water
D: The instant glue whose PH≥6.
E：The printing ink on the PCB and the glue on the leds should apply materials with the property of un-printing and volatility. |
|
| Copyright @ LianZhen Optoelectronics Tech CO.,Ltd.2011-2013 All rights Reserved |