|
|
Drawing: |
 |
|
Product name： |
T8 LED tube light kits |
|
Serial number： |
LZPC-8-SS |
|
Specification: |
￠26mm*1.0mm |
| PCB size: | 18.5mm×1.0mm (width×thickness) |
|
Assembling： |
1/2 PC cover + 1/2 heat sink + two end caps |
| PC cover type: | 1： transparent 2： transparent with inner strips 3： diffused |
|
Material: |
1： Polycarbonate Transparent PC Material / Milky Diffused Material Raw material mode： PC-3110ZHP、PC-1250Z-100、PC-S2000UVR、PC- 2215、PC-EKD2108. Flame retardant: 94-V2、 94-V0 2: AL 6063 (6063-T5 navigational aluminum) |
|
Power supply device: |
Interior power supply |
|
Transmittance: |
1: Transparent PC cover ≥90%, 2: Diffused PC cover ≥ 87%. |
|
Beam angle: |
≥207° |
|
Features: |
1： High transmittance、 2： Uniform luminous、 3： Anti-yellowing: not going yellow in 3-5 years 、 4： High anti-UV index、 5： Good freezing resistance: Non-embitterment above -50℃ ; 6： High thermo stability: without distortions below 130℃. 7： Glow-wire test past 650℃. 8： The 6063-T5 aviation aluminum is good at rapid heat dispersion. 9： The warranty can be up to 5 years, under the proper temperature conditions in doors. |
| Report: | We can supply the material reports: UL、MSDS、 SGS、 REACH and so on. |
|
Test methods: |
1： Salt mist test、 2： High free drop anti cracking test、 3： high and low temperature test、 4： Anti-yellowing in outdoor exposure test. |
|
Inspection accordance: |
professional standard |
|
Tips: |
The general problem of the PC cover mostly refers to appearing irregular cracks in the use of the tube lighting, which is mostly caused by chemical substances. The reason is that the prestress of the polycarbonate and BPA of the raw material can produce chemical reaction when they meet chemicals. |
|
| Copyright @ LianZhen Optoelectronics Tech CO.,Ltd.2011-2013 All rights Reserved |