|
|
Drawing: |
 |
|
Product name： |
T8 LED tube light kits |
|
Serial number： |
LZPC-8-N |
|
Specification: |
￠26 |
| PCB size: | 15.0mm×1.0mm (width×thickness) |
| PC cover type： | 1： Transparent
2： Transparent with inner strips 3： Diffused |
|
Assembling： |
2/3 PC cover + 1/3 heat sink + two end caps |
|
Material: |
1： Polycarbonate
Transparent PC Material / Milky Diffused Material
Raw material mode：
PC-3110ZHP、PC-1250Z-100、PC-S2000UVR、PC- 2215、PC-EKD2108.
Flame retardant: 94-V2、 94-V0 2: AL 6063 (6063-T5 navigational aluminum) |
|
Power supply device: |
External power supply |
|
Transmittance: |
2: Diffused PC cover ≥ 87%. |
|
Beam angle: |
≥207° |
|
Features: |
1： High transmittance、
2： Uniform luminous、
3： Anti-yellowing: not going yellow in 3-5 years 、
4： High anti-UV index、
5： Good freezing resistance: Non-embritterment above -50℃ ;
6： High thermo stability: without distortions below 130℃.
7： Glow-wire test past 650℃.
8： The 6063-T5 aviation aluminum is good at rapid heat dispersion.
9： The warranty can be up to 5 years, under the proper temperature conditions in doors. |
|
Test methods: |
1： Salt mist test、
2： High free drop anti cracking test、
3： high and low temperature test、 4： Anti-yellowing in outdoor exposure test. |
|
Inspection accordance: |
professional standards |
|
Tips: |
1: The general problem of the PC cover mostly refers to appearing irregular cracks in the use of the tube lighting, which is mostly caused by chemical substances. The reason is that the prestress of the polycarbonate and BPA of the raw material can produce chemical reaction when they meet chemicals.
2: In case rise the problem as above, Paying attention to not applying some substances as following:
A: Industrial Thinner、
B: Alcohol、
C: Plate washer water
D: The instant glue whose PH≥6.
E：The printing ink on the PCB and the glue on the leds should
apply materials with the property of un-printing and volatility.
|
|
| Copyright @ LianZhen Optoelectronics Tech CO.,Ltd.2011-2013 All rights Reserved |