Lianzhen Plastic&Electronic Tech Co.,Ltd Lianzhen Dongguan City the plastie Electronies Techoology Co,.Ltd
Home About us Products Enterprise Case show News Partners Message Contact us
New product
LED tube accessory series
LED U/V-shape hard bar series
LED flexible strip series
Solar accessory series
Electrical equipment/Machinery
The various plastic profiles
Auto parts series
LianZhen Optoelectronics Tech C.,Ltd
Address: No.2,Liyuan Industrial 2nd Rd, Luwu Lizhi Yuan Village, Changping Town, Dongguan City, Guangdong Province, China 523587
Tel: 86 769 82207705
Fax: 86 769 83028635
E-mail:frankhu@leddglz.com

LED tube light LZPC-8-R

Product name:     
T8 LED tube light kits
Serial number:     
LZPC-8-R
Specification:         
¢26mm*1.0mm
PCB size:
22.5mm×1.0mm (width×thickness)
Assembling:         
1/2 PC cover + 1/2 heat sink + two end caps
PC cover type:
1: Transparent
2: Transparent with inner strips
3: Diffused
Material:                
1: Polycarbonate
Transparent PC Material / Milky Diffused Material
Raw material mode:
PC-3110ZHP、PC-1250Z-100、PC-S2000UVR、PC- 2215、PC-EKD2108.
Flame retardant: 94-V2、 94-V0
2:  AL 6063 (6063-T5 navigational aluminum)
Power supply device:                         
Interior power supply
Transmittance:       
2:  Diffused PC cover  ≥ 87%.
Beam angle:          
≥ 168°
Features:                                 
1: High transmittance、
2: Uniform luminous、
3: Anti-yellowing: not going yellow in 3-5 years 、
4: High anti-UV index、
5: Good freezing resistance: Non-embitterment above -50℃ ;
6: High thermo stability: without distortions below 130℃.
7: Glow-wire test past 650℃.
8: The 6063-T5 aviation aluminum is good at rapid heat 
       dispersion.                               
9: The warranty can be up to 5 years, under the proper 
       temperature conditions in doors.
Report:
We can supply the material reports: UL、MSDS、SGS、REACH and so on.
Test methods:       
1: Salt mist test、
2: High free drop anti cracking test、
3: high and low temperature test、
4: Anti-yellowing in outdoor exposure test.
Inspection accordance:       
professional standards
Tips:                      
1:  The general problem of the PC cover mostly refers to appearing
      irregular cracks in the use of the tube lighting, which is mostly
      caused by chemical substances. The reason is that the   
      prestress of the polycarbonate and BPA of the raw material can
      produce chemical reaction when they meet chemicals.   
2:  In case rise the problem as above, Paying attention to not
     applying some substances as following:
A:  Industrial Thinner、
B:  Alcohol、
C:  Plate washer water 
D:  The instant glue whose PH≥6.
E:The printing ink on the PCB and the glue on the leds should
     apply materials with the property of un-printing and  volatility.  

Copyright @ LianZhen Optoelectronics Tech CO.,Ltd.2011-2013 All rights Reserved