Drawing:               

Product name：     

 T10 LED tube light kits

Serial number：    

  LZPC-10-D

Specification:        

 0.6m、0.9m、1.2m、1.5m、2.4m

Compound mode：

 1/2 PC cover + 1/2 heat sink + two end caps

2： transparent with inner strips

Material:               

1： pure transparent polycarbonate material

2： milky diffused material

      As following：PC-3110ZHP、PC-1250Z-100、PC-S2000UVR、PC-

      2215、PC-EKD2108.

3:  Flame retardant: 94-V2、 94-V0

Power supply  device:

Interior power supply

Transmittance:      

2:  Diffused PC cover  ≥ 87%.

Beam angle:         

Features:              

1： High transmittance、

2： Uniform luminous、

3： Anti-yellowing: not going yellow in 3-5 years 、

4： High UV index、

5： Good freezing tolerance: Non-embitterment above -50℃ ;

6： High thermo stability: without distortions below 130℃.

7： Flame retardant test past 650℃.

8： The 6063-T5 aviation aluminum is good at rapid heat dispersion.

9： The warranty can be up to 5 years, under the proper temperature 

       conditions in doors.

Test methods:      

4： Anti-yellowing in outdoor exposure test.

Inspection accordance:

professional standards

 Tips:                         

1:The general problem of the PC cover mostly refers to appearing 

    irregular cracks in the use of the tube lighting, which is mostly caused

    by chemical substances. The reason is that the prestress of the

    polycarbonate and BPA of the raw material can produce chemical

    reaction when they meet chemicals.

2: The user should pay attention to not applying industrial Thinner、

    alcohol、plate washer water and the instant glue whose PH6.

3: The printing ink on the PCB and the glue on the leds should apply  

     materials with the property of un-printing and volatility.